 |
 |
 |
Vision Hobbies |
| Bringing Quality and Service to the RC Modeler |
|
|
|
RC Airplanes Electric Please SCROLL DOWN for more models
 |
F-20 Tiger Shark Electric Ducted Fan Click For Video
Northrop developed the F-20 Tigershark in response to a U.S. Government call for the private development of a tactical fighter specifically tailored to meet the security needs of allied and friendly nations. The first flight of the Tigershark was made August 30, 1982. The Mach 2 class F-20 Tigershark's basic single-seat configuration was formally designated the F-20A. The F-20 combined propulsion, electronics and armament technologies with improvements in reliability to sustain high sortie rates in adverse weather.
The F-20 incorporated a combination of advanced technology features. The F-20 could carry more than 8,300 pounds of external armaments and fuel on five pylons. It could carry six Sidewinder missiles on air-to-air missions. For air-to-ground missions, more than 6,800 pounds of armament could be carried. Two internally mounted 20mm guns were standard equipment on the Tigershark.
This amazing ARF is constructed from quality balsa complete with red/white cover, brushless 3900 KV motor, ducted fan unit, wind tubes, landing gear (non-retractable), steearable nose wheel and all hardware needed to complete the model. The ARF is designed for an intermediate builder and requires 4 micro servos, 45 AMP brushless speed controller, recommend Poly RC 3200 30c 4s LiPo battery pack and wire extensions.
Hours of enjoyment at an affordable price will have you in the air in no time.
Hurry as we have limited stock and they are selling fast.
F-20 Tigershark ARF Price $329.00
F-20 Tigershark ARF with Poly RC 3200mAh 5s 30C and Storm 45 Amp High Voltage ESC Price $549.99 SAVE!
Click on link to select your option |
Technical Data Length
Wingspan Total Weight
|
 |
INTRUDER
For 34 long years from 1963 to 1997, the INTRUDER was at the sharp end of the America’s Navy and Marine Corps carrier-based strike force. With its high-wing style and comparatively longer main wing span, the INTRUDER not only remains true to the original characteristics, but also delivers amazingly stable flight. As the best introduction to electric jet airplane flight, this airplane is ideally suited to intermediate-level fliers. The lightweight design features a durable styrene fuselage and is almost completely assembled and equipped with three micro-servos for the pre-installed ailerons (x 2) and elevator. Simply attach the main wing halves, install the fan into the ducted unit, set the linkage rods and apply decals to finish. The PIP (plug in play) specifications allow to you install the R/C system of your choice, so the thrill of user-friendly action-packed jet fighter performance is right at your fingertips. Styrene body realizes a realistic lightweight fuselage complete with color scheme.
Includes: Equipped with compact 55mm diameter electric powered 5-blade ducted fan unit. Exquisite bell-mouth shape combines with fan and stators to produce large amounts of thrust. Includes optimal high-performance brushless motor and special 25A brushless motor controller. Canopy with magnetic lock makes battery changes fast and simple. Fitted with one elevator micro servo and two aileron micro servos.
Required for Operation 4-channel transmitter and receiver for airplanes Poly RC Battery / 11.1V 700 - 1200 mAh Li-Po (Lithium Polymer) battery Specail Li-Po battery charger Specified batteries for transmitter 2-prong cord for aileron servo
Click Add to Cart Button to select package
$199.99 Intruder 
Combo Save $229.99 Intruder w/ Poly RC 700mAh 3s 30C LiPo battery
Combo Save $241.99 Intruder w/ Poly RC 1200mAh 3s 30C LiPo battery
|
|
Technical Data Length 29.13in (740mm) Wingspan 28.35in (720mm) Total Weight 15.17-15.88oz (430-450g) Wing Area 155sq.in.(10dm2) Thrust 13.05oz (370g) |
 |
Vision 3D Profile Balsa ARF. What a 3D Machine! Click for Video Want 3D performance an easy build and flat out fun with a built up wing? The Vision 3D is it! Very easy to see in the air in a light-weight red/white covering scheme! The Vision 3D comes complete with landing gear, instructions and all the hardware required. Carbon Fiber support throughout the aircraft insures the durability far beyond a common foam model. Receiver and ESC go inside the wing for clean lines and security! This is a flyer for all the 3D action you want with stability at slow speeds when you approach your landing in an inverted hover. Assembly takes about 4 hours having you in the air in no time using rudder, elevator and ailerons and four micro servos Required for Operation 4ch transmitter, receiver four-micro servos, ESC, electric motor and battery. Combo Package Includes
Vision Balsa 3D Profile, Storm 3530-1400 Brushless Outrunner Motor, Storm 35 AMP Brushless ESC, Poly RC 1500 mAh . Combo Price $250.00 Save!
Vision 3D Only $68.17 |
|
Technical Data Length 30.5" Wingspan 32" Typical Weight 21- 23 oz. Flown with Storm 3530-1400, 35 AMP ESC |
 |
The CALMATO EP 1400 all balsa construction has come to define what entry-level airplanes are all about. Plenty of lift enables the calm control characteristics and power that can even produce stunt flying as your hands become more experienced in control. Simply join the wing halves with the steel pins and fix with tape, then attach the tail wing and rudder to complete the mostly pre-built fuselage with pre-installed motor, servos and linkages. In addition, the airplane is powered by a included brushless motor that delivers an ideal amount of constant high-power for beginner flight. Complete your flight preparation by adding a brushless speed control, four servos, your transmitter / receiver and a Poly RC Li-Po battery .
Combo Package Includes: Calmato EP 1400, Storm 35 AMP Brushless ESC, Poly RC 2000 mAh Lithium Polymer Battery Pack Combo Package Save : $299.99 Calmato EP 1400 Only: PRICE: $139.99 |
|
Technical Data Length 1,095mm Width 1,400mm Weight 1,600g (approx.) Wing Area 32dm2 Wing Load 50g (approx.)/dm2 Wing Type Original Symmetrical |
 |
Kyosho F-16 Fighting Falcon DF55 Click for Video Take two hours of build time and have yourself a ball!!! Add a receiver, transmitter and a battery (recommend Poly RC 1200 mAh 30C perfect fit, size and weight) The new DF55 is a brushless ducted fan unit with an impellor diameter of 55mm, which is 10mm larger than the popular DF45. It's installed in a hybrid foam fuselage that sets new standards for scale appearance and durability. The airframe can handle the higher loads that result from the exceptional performance of the bigger ducted fan while remaining incredibly light. The F16 is factory assembled with the brushless motor, micro servos and brushless speed control installed! Go fly one of the most high-performance ducted fan jets available. Combo Price F-16 and Poly RC 1200 mAh 30C Lipo Pack Save! PRICE: $258.00 Kyosho F-16 RC Airplane Only PRICE: $199.99 |
|
Technical Data Wingspan 24 inches Length 29.84 inches Weight 15 oz AUW Ducted Fan Thrust 350g+ w/Poly RC 30c 1200 Pack 55mm Brushless Motor |
 |
Illusion DF45 Brushless Ducted Fan EP Jet Kyosho new high-performance brushless powered ducted-fan jet. The new Illusion DF45 ARF features solid construction with a fiberglass fuselage and durable balsa wings. The main wing features blended winglets for greater efficiency and performance. The DF45 comes with the brushless motor and fan unit installed, so all you need to do is provide radio gear, electronic speed control and batteries. The sleek delta-wing jet features a tail-mounted ducted fan that cranks out up to 50,000 rpm for stunning speed and agility from a plane of its size. The DF45 is already very fast, but extreme performance enthusiasts can even change the included brushless motor for something more powerful for ultimate flight performance. No landing gear on aircraft. Required for Operation4-channel radio w/2servos Brushless speed ontroller(40A+)11.1V Li-Po RC Poly battery Combo Package that includes Illusion DF45 ARF, Poly RC700 30C Lipo Pack, Brushless ESC and two servos! Combo Price RED $335.00 Save! 
Combo Price BLUE $335.00 Save!
Illusion DF45 Ducted Fan Price RED $189.99
Illusion DF45 Ducted Fan Price BLUE $189.99
Watch Video |
Click on Above Image to Enlarge Technical Data Length 25 in Wingspan 23.6 in Weight 10-14oz Wing Area 132 sq in. Thrust 12 oz + Recommend Poly RC 30c pack |
 |
The 50 Size Kyosho Pitts Special S-2C Electric Version. This ARF is the electric version with upper hatch for easy access! Retaining the defining features and characteristics of the Pitts design, improved aerial response is achieved through a newly designed main wing, fuselage, wing flaps and tail wing. Difficult acrobatic stunts are now done relatively easy. The ARF is almost entirely factory assembled so getting in the air is only a few hours away after opening the box! Featuring light and durable all-balsa construction with beautifully colored and applied film covering, the workmanship of this aircraft makes is a great display model as well as an acrobatic flyer. Includes pre-painted FRP cowling and wheel pants, fully symmetrical wing and synchronized upper and lower ailerons recreate the spectacular acro performance of the original, fully featured kit includes linkage parts and tires, wheel pants and tapered pin stripe coloring are expertly finished. Required for Operation R/C system 5 channel for aircraft, ESC, Electric Motor and Battery
Combo Package includes Kyosho Pitts Special, Storm 42-50-600 Brushless Motor, Storm 55 Amp Brushless ESC, and Poly RC 3700 4s LiPo Pack Retail Value of $622.63
Combo Price $499.99 CALL ONLY!!
Kyosho Pitts Special Only Price $210.00
|
| Technical Data | | Length: | 1,065mm | | Width: | 1,172mm | | Weight: | 2600~2700g (approx.) | | Wing Area: | 43dm2 | | Wing Load: | 60.4g/dm2 (approx.) | | Wing Type: | Original Full synmmetrical |
|
|
|
|